WIB Disassembly | Disassembly Videos | Knowledge Base
Disassembly Videos
Video Step 43 – Attach the Lid
Video Step 42 – Attach Front Cover
Video Step 41 – Store the Back-Mounted Bracket
Video Step 40 – Secure Support Arm and Cables in the Front Cover
Video Step 39 – Remove Back-Mounted Bracket and Articulating Mounting Arm from Support Arm
Video Step 38 - Remove Support Arm
Video Step 37 - Remove Back-Mounted Support Bracket from the ATA Case
Video Step 36 - Remove the Side-Mounted Support Bracket from the ATA Case
Video Step 35 – Place Front Cover on Top of Layer 1 of Foam Packing Tray
Video Step 34 - Stadium Section of Conveyor Table Assembly
Video Step 33 - Outbound Section of Conveyor Table Assembly
Video Step 32 - Inbound Conveyor Table Section
Video Steps 30 -31 Disassemble Table Extension & Stadium Ramp Support (Backstop) Bars & Store Accessories
Video Steps 28 - 29 Remove Table Extension Fasteners, Support Bar Fasteners & Extension
Video Step 27 – Prepare Stadium Ramp for and Storing Ramp
Video Step 26 – Remove Stadium Ramp from Table Extension
Video Step 25 – Remove Stop Pin from Stadium Ramp & Store in Tools & Small Parts Box
Video Step 24 – Store Accessories in Layer 1 of Foam Packing Tray
Video Step 23 – Unplug and Store Barcode Scanner
Video Step 22 - Uninstall Barcode Scanner Cradle
Video Steps 20 - 21 - Remove Articulating Arms for Cameras with Ring Lights and Stow in Foam Tray
Video Step 19 - Right (Back) Camera (red cord) Disassembly and Storage
Video Step 18 - Left (Front) Camera (blue cord) Disassembly and Storage
Video Step 17 – Pack Top (Aerial) Camera with Ring Light (Orange) in Layer 2 of Foam Packing Tray
Video Step 16 – Remove Cameras with Ring Lights
Video Step 15 – Remove Cord Clips for Cameras with Ring from Articulating Mounting Arms
Video Step 14 – Remove Standard Document Camera Mounting Base from the Support Arm
Video Step 13 – Remove the Stadium Document Camera Mounting Base from the Support Arm
Video Step 12 - Unplug and pack the Document Camera Cords
Video Step 11 – Disassemble the Monitor Support Pole
Video Step 10 - Remove the Horizontal Monitor Support Bar
Video Steps 7-9 Remove Cable Clips, Vesa Mount & Adjust Mount for Storage
Video Steps 5 - 6 Get Monitor Storage Case & Remove Monitors from Vesa Mount
Video Step 4 - Unplug Main Power Cord & Ethernet Cable
Video Step 3 - Position Foam Packing Tray Layer 2
Video Step 2 - Unplug Monitors and Top/Aerial Camera
Video Step 1 - Disconnect the cords