The following instructions show the Stadium Ramp however, the instructions are the same for the File Capture Platform with the only variation being the File Capture Platform does not have a handle. Step 25 – Remove Stop Pin from Stadium Ramp & Store ...
Step 30 – Disassemble Table Extension & Stadium Ramp Support (Backstop) Bars Using the 6mm (Grey), loosen the hex screws securing the Stadium Ramp Support Bar to the Table Extension Support bars. These are the Hex Screws located below the Stadium ...
Step 28 – Remove Table Extension Fasteners & Support Bar Fasteners Using the 3/16” Hex Key (White) remove the two (2) hex screws securing the table extension to the conveyor section. The Screws securing the table extension can be found in each corner ...