Video Steps 5 - 6 Get Monitor Storage Case & Remove Monitors from Vesa Mount

• Related Articles

• Monitors (Step 5 - 11)

  Step 5 - Get Monitor Storage Case Remove the Monitor Storage Case from the shelves below the main conveyor section. Plate the Monitor Storage Case on top of Layer 2 of the Foam Packing. Remove the cover of the Monitor Storage Compartment. Step 6 - ...

• Video Steps 7-9 Remove Cable Clips, Vesa Mount & Adjust Mount for Storage

• ATA case (Steps 42 - 43)

  Step 42 – Attach Front Cover Align the Front Cover so the latches can be secured. Use your foot as a support to align the Front Cover. Once aligned, make sure there are no cables hanging that can be caught in the Front Cover Seam. Secure the latches. ...

• Remove Cameras w/ Ring Lights (Steps 15 - 19)

  Step 15 – Remove Cord Clips for Cameras with Ring from Articulating Mounting Arms Remove the Cord Clips from the Articulating Arm channels by pinching open side of the clips together to disengage them from the Articulating Arm channels as shown in ...

• Remove Barcode Scanner (Steps 22 - 23)

  Step 22 - Uninstall Barcode Scanner Cradle Using the 5/32” Hex Key, remove the barcode scanner mount from the inbound conveyor section. Step 23 – Unplug and Store Barcode Scanner Unplug the Barcode Scanner from the USB Port labeled Barcode which is ...