Step 32 - Inbound Conveyor Table Section Remove the Inbound Conveyor Table Section from the base by unscrewing with two (2) Seven-Lobed Knob – conveyor section fasteners. Store the two (2) Seven-Lobed Knob – conveyor section fasteners in the ...
Step 28 – Remove Table Extension Fasteners & Support Bar Fasteners Using the 3/16” Hex Key (White) remove the two (2) hex screws securing the table extension to the conveyor section. The Screws securing the table extension can be found in each corner ...
Step 30 – Disassemble Table Extension & Stadium Ramp Support (Backstop) Bars Using the 6mm (Grey), loosen the hex screws securing the Stadium Ramp Support Bar to the Table Extension Support bars. These are the Hex Screws located below the Stadium ...