Camera Settings/Configuration Buttons

Camera Settings/Configuration Buttons

     

Save


Save allows the user to save custom settings. This gives the user the ability to load a saved camera configuration that is different from the default settings.

Reset Default


Reset Default allows the user to quickly reset the settings to the default settings.

Reset Saved


Reset Saved allows the user to change the custom settings for a single image. When Reset Saved is selected the saved custom settings are deployed after the changes.

Exit


Exit allows the user to close the camera configuration menu and return to capturing photos.


    • Related Articles

    • Test Configuration

      Test the configuration Once all cameras are adjusted, run a Configuration Test to verify the WIB™ Unit configuration and connectivity before or during production. To ensure you are starting with a clean session and the correct configuration, close ...

    • Buttons

      Buttons in Capture Program Hamburger Menu Hamburger menu contains the settings, peripheral connections, services and other unit options . Administration Menu The administration menu allows managers to set up users, manage sessions, and enable Kiosk ...

    • Camera Settings

      Camera Settings Camera settings include setting the Channel, Resolution, show/hide Focus Controls, and Configuration for each camera. There are two (2) types of cameras: array and document. The three (3) array cameras capture the front, back, left, ...

    • Section 1.3 Operational Buttons

      Operational Buttons allow the user to start and stop a session, focus the camera(s), switch between the standard and stadium document cameras, and perform the various image captures of a box during a session. Note: A Stream Deck controller can be ...

    • Section 1.1.1.3 Settings

      The User Settings dialog displays the configuration values stored in the user.config file on the WIB™ Unit device. It is accessible to sysadmins only via the Administration Menu. To open the User Settings dialog, click Settings in the Administration ...