05 - Switch between Document Cameras

05 - Switch between Document Cameras

How to switch between standard and stadium document camera

Previous Article: 04 - Array Photos

Switch between Document Camera(s)

Make sure the Capture program is focused on the Standard Document Camera. You can determine the focus by based on which direction the Camera Switch Focus button is pointing. If the arrow is green and pointing to the left as shown, then the focus is on the Stadium Document Camera. Select the Camera Switch Focus – Right to change the focus to the Standard Document Camera. If the arrow is blue and pointing to the right as shown, then the focus is on the Standard Document Camera. Proceed to position the Standard Document Camera. Once the Standard Document Camera is positioned change the focus to the Stadium Document Camera by selecting the Camera Switch Focus - Right. Follow the instructions for positioning the Stadium Document Camera.

 The Standard Document Camera is located on the left side of the apparatus and is positioned to take a photo of the box when in the same position as the array photos

 

 Switch Camera - Left


The Stadium Document Camera is located on the right side of the apparatus and is positioned to take a photo of the box content when fanned on the stadium ramp.

 

 



    • Related Articles

    • Focus Cameras

      How to Focus Cameras Focus Camera(s) There are two different camera focus buttons. One button focuses all cameras in on action the other focuses either the standard or stadium document camera whichever the program is set to capture photos from. Focus ...

    • Cameras Settings Introduction

      Camera Settings Camera settings include setting the Channel, Resolution, show/hide Focus Controls, and Configuration for each camera. There are two (2) types of cameras: array and document. The three (3) array cameras capture the front, back, left, ...

    • 06 - Standard/Manifest Photo

      Previous Article: 05 - Switch between Document Cameras Standard/Manifest Photo Position the Box for the Manifest and/or Standard Photo If required, rotate the box so that the file labels are captured on the second monitor. If the content camera in ...

    • Set Auto Focus for Cameras with Ring Light

      Optional – Set Auto Focus for Cameras with Ring Light The three-prong camera mount that secures the camera to the ring light can be rotated to position the camera. If needed, rotate the mount so the camera can be positioned correctly. Make sure the ...

    • Configure Cameras

      Configure Configuration settings allow the operator to manually set each of the settings to the desired effect. The operator can set the resolution from the configure menu as well adjust the brightness, contrast, gamma, hue, saturation, sharpness, ...