Focus Cameras

Focus Cameras

How to Focus Cameras

Focus Camera(s)

There are two different camera focus buttons. One button focuses all cameras in on action the other focuses either the standard or stadium document camera whichever the program is set to capture photos from.

Focus All Cameras

During the capture process the end user may need to focus one or more of the cameras. This focus button will focus all the cameras all at once. This button is located on the bottom left hand side of the application below the System Status.  

Focus Standard/Stadium Camera

During the capture process the end user may need to focus the standard and/or stadium camera, whichever is being used to capture photos. The right monitor showing the content the camera is focused on will show a separate focus button. The standard/stadium focus button will only focus the camera being used. Please refer to Switch between Standard and Stadium Cameras to change the focus of the program to one or the other of the document cameras.

    • Related Articles

    • Set Auto Focus for Cameras with Ring Light

      Optional – Set Auto Focus for Cameras with Ring Light The three-prong camera mount that secures the camera to the ring light can be rotated to position the camera. If needed, rotate the mount so the camera can be positioned correctly. Make sure the ...

    • Cameras Settings Introduction

      Camera Settings Camera settings include setting the Channel, Resolution, show/hide Focus Controls, and Configuration for each camera. There are two (2) types of cameras: array and document. The three (3) array cameras capture the front, back, left, ...

    • 05 - Switch between Document Cameras

      How to switch between standard and stadium document camera Previous Article: 04 - Array Photos Switch between Document Camera(s) Make sure the Capture program is focused on the Standard Document Camera. You can determine the focus by based on which ...

    • Configure Cameras

      Configure Configuration settings allow the operator to manually set each of the settings to the desired effect. The operator can set the resolution from the configure menu as well adjust the brightness, contrast, gamma, hue, saturation, sharpness, ...

    • Camera Channels - Assign Cameras

      Camera Channel The five (5) camera channels are as follows: 1. Left – the blue camera in Figure 4. 2. Back – the red camera 3. Top – orange camera 4. Standard – green camera; and 5. Stadium – yellow camera Note: The highlight color for camera(s) 1 ...