7.11.6 Blank Monitor/Orange Light

7.11.6 Blank Monitor/Orange Light

 Blank Monitor/Orange Light

The capture program will let you know if there is no connectivity to one of the monitors. You can proceed working in single monitor mode, but this is not suggested. Check all the cables. It is suggested you completely pull the cable and plug it back in. Sometimes they appear to be connected when they are loosely connected. Exit the capture program and restart the WIB™ Unit.


    • Related Articles

    • Rotate Touchscreen Monitor

      How to change the orientation of the Touchscreen Monitor Rotate the Orientation of the Touch Screen Monitor The operator can change the display setting so that the capture program runs in Landscape Mode or Portrait mode. The current setting is ...

    • Set Auto Focus for Cameras with Ring Light

      Optional – Set Auto Focus for Cameras with Ring Light The three-prong camera mount that secures the camera to the ring light can be rotated to position the camera. If needed, rotate the mount so the camera can be positioned correctly. Make sure the ...

    • Camera Settings

      Camera Settings Camera settings include setting the Channel, Resolution, show/hide Focus Controls, and Configuration for each camera. There are two (2) types of cameras: array and document. The three (3) array cameras capture the front, back, left, ...

    • Operational Buttons

      Operation Buttons Operation Buttons allow users the ability to start and stop a session, focus the camera(s), switch between the standard and stadium document cameras, and perform various image captures of a box during a session. Operation buttons ...

    • Notes

      Notes The Notes section contains a list of the notes added to session and/or the current box. The session note will persist throughout the session while a box note will change when a new barcode is scanned and the user either leaves the box note ...